MSP is now an ISO 9001 Certified Manufacturer

TACTILE DOME SWITCH
    MECHANICAL SWITCH
    • Tactile: Metal or Plastic Domes
    • Termination: Std, Berg Type .10 Centers
    • Operational Life: In excess of one million cycles
    • Operational Environment: -40°C to 80°C
    • Actuation Force: Std. 6-8 Ozs, custom available
    • Travel: .005 and Up
    Electrical Specifications
    • Capacitance: 27 pf Max, between any 2 conductors
    • Contact Bounce: 2 milliseconds nominal 10ms max
    • Contact Resistance: typical under 100 ohms
    • Contact Rating: 50 ma @ 30 VDC
    • Contact Material: silver to silver typ other combinations available
    • Circuit Config: X-Y Matrix Std, All switches are single pole normally open
    • Open Circuit Resistance: 5 x 10 6 Ohms min.
    • Dielectric Strength: 250V RMS Min.

FLATSWITCH
    MECHANICAL SWITCH
    • Tactile: Metal or Plastic Domes
    • Termination: Std, Berg Type .10 Centers
    • Operational Life: In excess of one million cycles
    • Operational Environment: -40°C to 80°C
    • Actuation Force: Std. 6-8 Ozs, custom available
    • Travel: .005 and Up
    Electrical Specifications
    • Capacitance: 27 pf Max, between any 2 conductors
    • Contact Bounce: 2 milliseconds nominal 10ms max
    • Contact Resistance: typical under 100 ohms
    • Contact Rating: 50 ma @ 30 VDC
    • Contact Material: silver to silver typ other combinations available
    • Circuit Config: X-Y Matrix Std, All switches are single pole normally open
    • Open Circuit Resistance: 5 x 10 6 Ohms min.
    • Dielectric Strength: 250V RMS Min.

PC BOARD SWITCH
    MECHANICAL SWITCH
    • Tactile: Metal or Plastic Domes
    • Termination: Std, PC Board type
    • Operational Life: In excess of one million cycles
    • Operational Environment: -40°C to 80°C
    • Actuation Force: Std. 6-8 Ozs, custom available
    • Travel: .005 and Up
    Electrical Specifications
    • Capacitance: 27 pf Max, between any 2 conductors
    • Contact Bounce: 2 milliseconds nominal 10ms max
    • Contact Resistance: typical under 100 ohms
    • Contact Rating: 50 ma @ 30 VDC
    • Contact Material: silver to silver typ other combinations available
    • Circuit Config: X-Y Matrix Std, All switches are single pole normally open
    • Open Circuit Resistance: 5 x 10 6 Ohms min.
    • Dielectric Strength: 250V RMS Min.

Membrane Switch And Panel, Inc.
1703 Boyd St., Santa Ana, CA 92705
Tel:714-258-9186, Fax: 714-258-9188, Email: info@membraneswitchandpanel.com
MSP is now an ISO 9001 Certified Manufacturer
© 2008, All rights reserved.